We offer a full range of products and services related to the environment protection and safety equipment: – Oil containment booms – Oil skimmers – Boom reels – Hydraulic power packs – Hydraulic transfer pumps – Storage tanks, bladders – Oil/chemical sorbent pads – Oil/chemical sorbent rolls – Oil/chemical sorbent socks, booms – Oil/chemical sorbent […]
You’ll find what you need among our array of high performing SOLBERG-ITS Discharge Devices. Whether you’re in the market for foam makers, monitors, hand line nozzles or anything in between, SOLBERG-ITS will deliver the right device to meet your hazard requirements.
Continuous Flow Hose Reel
SOLBERG-ITS Continuous Flow Hose Reel assemblies are manufactured with magna-cast aluminum supports and brass waterway. It also features a 1.5” (38mm) non-collapsible booster hose and brass 90-degree elbow inlet swivel with male 1.5” (38mm) NST outlet. The carbon steel reel was designed to store and deploy continuous flow hose, which allows liquid to flow while the hose is still on the reel.
SOLBERG-ITS foam concentrates are certified with a variety of fire sprinklers for use in foam-water sprinkler systems, these include closed, open or deluge head types.
SOLBERG-ITS Foam Chambers are NFPA-11 Type II air aspirating foam discharge devices that provide protection for open top floating and cone roof flammable liquid storage tanks. Foam chambers are a combination of a foam mixing chamber and a foam maker with an air inlet. A removable orifice plate is located between the flange inlet and solution pipe flange, and is sized to deliver the required foam solution at a specified pressure. A frangible glass vapor seal located in the foam chamber body prevents product vapors from entering the foam chamber body. The vapor seal will break once the foam solution enters, filling the foam chamber body with expanded foam. The foam flows to a deflector plate, which directs the foam to the inside of the storage tank wall and fuel surface, only allowing minimum foam submergence and fuel agitation.
SOLBERG-ITS Foam Makers are available in two models with nominal flow rates ranging from 10 – 300 gpm (38 – 1136 lpm) at 30 – 150 psi (2 – 10 bar) with threaded inlets and outlets. The stainless steel discharge tube incorporates a mixing barrel, an orifice plate (sized for the required flow at a given pressure) and an air inlet to allow air into the foam solution stream to generate expanded foam. The foam maker is normally installed in the line of a semi-fixed or fixed foam fire protection system. SOLBERG-ITS Foam Makers are air-aspirating foam discharge devices used primarily for the protection of the seal area of open top floating roof storage tanks and dike areas around storage tanks. Additional applications include protection of spill hazards and diked flammable liquid storage areas.
The SOLBERG-ITS Foam Station is a quick knock down, one-man operation foam station. The unit is self-contained, consisting of a 35 gallon (132 litre) stainless steel concentrate tank, eductor, handline nozzle and non-collapsible hose. When in operation, water is introduced from a dedicated water source through the supply hose to the eductor. While water is passing through the eductor a vacuum is created, which draws foam concentrate out of the tank, up to the eductor and into the water stream, delivering the foam solution.
High Back Pressure Foam Maker
SOLBERG-ITS High Back Pressure Foam Makers are available in four models with nominal flow rates ranging from 100 – 400 gpm (379 – 1514 lpm) with flange inlets and outlets. The carbon steel discharge tube has four air induction holes placed 90 degrees apart to allow air into the foam solution stream to generate expanded foam.
The TASK FORCE TIPS ZN and ZM INDUSTRIAL NOZZLES are a simple and rugged industrial nozzle with superior stream quality and reach. This fixed flow fog nozzle rated at 100 psi (7 bar) is available with an optional flow rate of 350, 500, 750, 1000 or 1250 (1325, 1893, 2839, 3785 or 4732 l/min).
The TASK FORCE TIPS PROTECTOR series of manual monitors are ideally suited for high performance fire flows under rugged industrial conditions. The lightweight aluminum alloy is hard coat anodized and powder coated for corrosion protection in even the most hazardous environments. An integrated stainless steel ball shutoff provides visual valve position indicator. Rated flows up to 1250 gpm (4732 l/min).
Self-Educting Foam Nozzle
The TASK FORCE TIPS MASTER FOAM nozzle is a simple and rugged self-educting foam nozzle with superior stream quality and reach. This fixed flow fog nozzle rated at 100 psi (7 bar) is available with an optional flow rate of 250, 350, 500, 750 or 1000 gpm (946, 1325, 1893, 2839, 3785 l/min). Fog angle is user adjustable between 90° wide fog and straight stream.