Fire suppression foam is comprised of three parts: foam concentrate, water, and air. When mixed correctly, these parts form a homogeneous foam blanket that extinguishes flames by the combined mechanisms of cooling, separating the flame source from the product surface, suppressing vapors, and smothering. This makes foam suppression systems an effective option for protecting flammable and combustible liquids. Typical areas of fire protection • Aircraft hangars • Petrochemical • Oil and Gas • Flammable liquid storage • Tank farms • Loading facilities • Warehouses • View the Industry Fire Risk Solutions Chart
SOLBERG-ITS offers a wide variety of System Tanks ranging from vertical to horizontal, standard and pre-piped, atmospheric, and stainless steel, as well as the accessories you’ll need to go with them. SOLBERG-ITS fixed foam suppression systems are designed to protect single and multiple high-hazard, high-risk applications including but not limited to aircraft hangars, foam-water sprinkler systems, helipads and truck loading racks.
See more Foam system tank
When it comes to Proportioning Devices, SOLBERG-ITS has the hardware you need to get the job done right—no matter what type of foam system.
See more Proportioning devicesYou’ll find what you need among our array of high performing SOLBERG-ITS Discharge Devices. Whether you’re in the market for foam makers, monitors, hand line nozzles or anything in between, SOLBERG-ITS will deliver the right device to meet your hazard requirements.
See more Discharge devices
As a custom manufacturer, we tailor our mobile products to meet your particular specifications.SOLBERG-ITS Mobile Products are designed to provide quick, mobile foam fire protection for hazards consisting of flammable liquids. These types of hazards can be defined but not limited to tank farms, loading racks (both truck and rail), chemical processing plants, and marine off loading / on loading terminals. SOLBERG-ITS Mobile Products greatly increases the firefighting ability of industrial, municipal, and military fire emergency responders. Mobile Product can be used with all SOLBERG-ITS foam concentrates (RE-HEALING™, ARCTIC™, FIRE BRAKE™).
See more Mobile productsFM-200® is a clean, colorless, and environmentally friendly fire suppression agent that is electrically non-conductive and safe for humans. It extinguishes flames primarily through heat absorption, leaving no residue, thus minimizing downtime after a fire and making FM-200 suppression systems accepted and respected worldwide with over one hundred thousand installations in more than seventy countries.
See more FM-200 suppression systems
Carbon dioxide (CO2) is a colorless, odorless, and chemically inert gas that is both readily available and electrically non-conductive. It extinguishes fire primarily by lowering the level of oxygen that supports combustion in a protected area. This mechanism of fire suppression makes CO2 suppression systems highly effective, requiring minimal clean-up, but should be used in normally unoccupied hazard locations or otherwise avoided by personnel when discharged. CO2 suppression systems may utilize the gas through a total flooding approach but carbon dioxide is also the only gaseous agent that may be utilized through local application. Carbon dioxide may be stored in either high pressure spun steel cylinders (HPCO2 suppression systems) or low pressure light wall refrigerated tanks (LPCO2 suppression systems). NOTE: Both HPCO2 and LPCO2 systems are equally effective at fighting fires. Neither one is better than the other in terms of extinguishment.
See more Carbon dioxide suppression systems
Copyright © 2018 Satina Software, Inc. All Rights Reserved. Legal Notices | Privacy & Cookies Policy
